Gliwice

Zwycięstwa 10, Gliwice, Poland, 44-100

The entrance to the facility is located on Dolnych Wałów Street. The rooms are situated in the center of Gliwice, just a 2-minute walk from the market square and 5 minutes from the train station. Access from the bus station is possible by bus lines number: 187, 702, 692. There is also an option for parking at a paid parking lot on the main street.

Subcategories (7)

Embedded Linux

Embedded Linux
Embedded C

Embedded C
Arduino

Arduino
FreeRTOS

FreeRTOS
Microcontroller

Microcontroller
Vivado

Vivado
Electronics

Electronics

Explore Our Courses

Electronic Control Unit (ECU) - Practical Vector

 28 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at intermediate-level automotive engineers and technicians who wish to gain hands-on experience in testing, simulating, and diagnosing ECUs using Vector tools like CANoe and CANape. By the end of this training, participants will be able to:
  • Understand the role and function of ECUs in automotive systems.
  • Set up and configure Vector tools such as CANoe and CANape.
  • Simulate and test ECU communication on CAN and LIN networks.
  • Analyze data and perform diagnostics on ECUs.
  • Create test cases and automate testing workflows.
  • Calibrate and optimize ECUs using practical approaches.
Read more...

Electronic Control Unit (ECU) - Theoretical Vector

 21 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at intermediate-level automotive engineers and embedded systems developers who wish to understand the theoretical aspects of ECUs, focusing on Vector-based tools and methodologies used in automotive design and development. By the end of this training, participants will be able to:
  • Understand the architecture and functions of ECUs in modern vehicles.
  • Analyze communication protocols used in ECU development.
  • Explore Vector-based tools and their theoretical applications.
  • Apply model-based development principles to ECU design.
Read more...

Deploying AI on Microcontrollers with TinyML

 21 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at intermediate-level embedded systems engineers and AI developers who wish to deploy machine learning models on microcontrollers using TensorFlow Lite and Edge Impulse. By the end of this training, participants will be able to:
  • Understand the fundamentals of TinyML and its benefits for edge AI applications.
  • Set up a development environment for TinyML projects.
  • Train, optimize, and deploy AI models on low-power microcontrollers.
  • Use TensorFlow Lite and Edge Impulse to implement real-world TinyML applications.
  • Optimize AI models for power efficiency and memory constraints.
Read more...

Advanced Arduino Programming

 14 Hours
In this instructor-led, live training in Gliwice, participants will learn how to program the Arduino using advanced techniques as they step through the creation of a simple sensor alert system. By the end of this training, participants will be able to:
  • Understand how Arduino works.
  • Dig deep into the main components and functionalities of Arduino.
  • Program the Arduino without using the Arduino IDE.
Read more...

Advanced Embedded Systems Development

 35 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers who wish to learn how to use embedded C to program various types of microcontrollers based on different processor architectures (8051, ARM CORTEX M-3, and ARM9).
Read more...

Arduino Programming for Beginners

 21 Hours
In this instructor-led, live training in Gliwice, participants will learn how to program the Arduino for real-world usage, such as to control lights, motors and motion detection sensors. This course assumes the use of real hardware components in a live lab environment (not software-simulated hardware).  By the end of this training, participants will be able to:
  • Program Arduino to control lights, motors, and other devices.
  • Understand Arduino's architecture, including inputs and connectors for add-on devices.
  • Add third-party components such as LCDs, accelerometers, gyroscopes, and GPS trackers to extend Arduino's functionality.
  • Understand the various options in programming languages, from C to drag-and-drop languages.
  • Test, debug, and deploy the Arduino to solve real world problems.
Read more...

ARM Technology

 14 Hours
An ARM processor is one of a family of CPUs based on the RISC (reduced instruction set computer) architecture developed by Advanced RISC Machines (ARM).
Read more...

Building A Robot from the Ground Up

 28 Hours
In this instructor-led, live training, participants will learn how to build a robot using Arduino hardware and the Arduino (C/C++) language. By the end of this training, participants will be able to:
  • Build and operate a robotic system that includes both software and hardware components
  • Understand the key concepts used in robotic technologies
  • Assemble motors, sensors and microcontrollers into a working robot
  • Design the mechanical structure of a robot
Audience
  • Developers
  • Engineers
  • Hobbyists
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Note
  • Hardware kits will be specified by the instructor before the training, but will roughly contain the following components:
  • Arduino board
  • Motor controller
  • Distance sensor
  • Bluetooth slave
  • Prototyping board and cables
  • USB cable
  • Vehicle kit
  • Participants will need to purchase their own hardware.
  • If you wish to customize this training, please contact us to arrange.
Read more...

Buildroot: a Firmware Generator for Embedded Systems

 7 Hours
Buildroot is an open-source project that contains scripts that produce a cross-compilation toolchain, a customizable root filesystem image, and a Linux kernel for embedded devices. During this practical course, participants will learn how to use it:
  • How to select software that goes into the root filesystem.
  • How to add new packages and modify existing ones.
  • How to add support for new embedded boards.
During the course, bootable filesystem images will be produced. Remote courses are delivered using the QEMU emulator, while in the classroom it is possible to use either QEMU or real embedded boards of the trainer's choice. Other projects with similar goals include the Yocto project and OpenWRT. Please use these presentations to determine which one is the right choice for your needs.
Read more...

C Programming for Embedded Systems

 21 Hours
The C programming language is perhaps the most popular programming language for programming embedded systems.
Read more...

Circuits and Electronics Fundamentals

 14 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers and computer scientists who wish to apply the fundamentals of circuits and electronics to design devices and systems that utilize properties of electrical components for the development of hardware functionalities. By the end of this training, participants will be able to:
  • Set-up and configure the necessary tools and programs for circuits and circuit board development.
  • Understand the basic principles behind circuits and electronics engineering.
  • Utilize the primary electronic components in constructing efficient computer hardware technologies.
  • Optimize electronic devices by implementing circuit analysis methods.
  • Apply the fundamentals of electronics and circuits to the development of enterprise applications.
Read more...

C++ for Embedded Systems

 21 Hours
Is C++ suitable for embedded systems such as microcontrollers and real-time-operating-systems? Should object-oriented-programming be used in microcontrollers? Is C++ too far removed from the hardware to be efficient? This instructor-led, live training addresses these questions and demonstrates through discussion and practice how C++ can be used to develop embedded systems with code that is accurate, readable, and efficient. Participants put theory into practice through the creation of a sample embedded application in C++. By the end of this training, participants will be able to:
  • Understand the principles of object-oriented modelling, embedded software programming and real-time programming
  • Produce code for embedded systems that is small, fast and safe
  • Avoid code bloat from templates, exceptions, and other language features
  • Understand the issues related to using C++ in safety-critical and real-time systems
  • Debug a C++ program on a target device
Audience
  • Developers
  • Designers
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Digital Signal Processing (DSP) Fundamentals

 21 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers and scientists who wish to learn and apply DSP implementations to efficiently handle different signal types and gain better control over multi-channel electronic systems. By the end of this training, participants will be able to:
  • Setup and configure the necessary software platform and tools for Digital Signal Processing.
  • Understand the concepts and principles that are foundational to DSP and its applications.
  • Familiarize themselves with DSP components and employ them in electronics systems.
  • Generate algorithms and operational functions using the results from DSP.
  • Utilize the basic features of DSP software platforms and design signal filters.
  • Synthesize DSP simulations and implement various types of filters for DSP.
Read more...

Embedded C Application Design Principles for Automotive Professionals

14 Hours
A two day course covering all design principles with code examples coupled with recent industrial technology; very useful for automotive software developers
Read more...

Embedded C Application Design Principles

 14 Hours
This instructor-led, live training (online or onsite) is aimed at C developers wishing to learn embedded C design principles. By the end of this training, participants will be able to:
  • Understand the design considerations that make embedded C programs reliable
  • Define the functionality of an embedded system
  • Define the program logic and structure to obtain the desired result
  • Design a reliable, error-free embedded application
  • Obtain optimal performance from target hardware
Format of the Course:
  • Interactive lecture and discussion
  • Exercises and practice
  • Hands-on implementation in a live-lab environment
Course Customization Options:
  • To request a customized training for this course, please contact us to arrange.
Read more...

Embedded Linux Systems Architecture

 35 Hours
Course Objectives To provide an understanding of the essentials of embedded GNU/Linux, how the bits and pieces fit together. What components are needed to build an embedded GNU/Linux system, where to get them from and how to configure/build/install them? Where to get help from? What about those software licenses? Hands-on exercises provide you with the necessary practical experience to go ahead and develop your own embedded GNU/Linux systems after completing this training successfully. Description This five day training class uses hands-on exercises combined with instruction to illustrate the concepts of embedded GNU/Linux. It is designed to bring you quickly up to speed. The philosophy, concepts and commands necessary to make effective use of GNU/Linux are described through a combination of theory and on-the-job training. Don't reinvent the wheel, but learn from an experienced trainer and take home a working knowledge of GNU/Linux and the ability to use it effectively in your own embedded development project. Who should attend? Managers, project managers, software-, hardware-, development-, systems engineers, testers, administrators, technicians and other parties interested in the technology, who want to understand as quickly as possible how Embedded GNU/Linux works. You must use GNU/Linux or you have to luxury to decide whether it makes sense to use it or not. Maybe you already tried to use Embedded GNU/Linux, but are not quite sure that you did everything the right way. You currently use a different operating system and wand to figure out whether GNU/Linux might better and/or cheaper. Delivery Options All the training material is English, but the presentation of it can be in English or in German, as you wish, worldwide.
  • on-site - instructor driven
  • on-line - instructor driven
  • on-site/on-line combination - instructor driven
Read more...

Embedded Linux Kernel and Driver Development

14 Hours
A two day course consisting of around 60% hands-on labs focusing on Embedded Linux kernel internals, architecture, development and investigating how to write and integrate several types of device drivers. Who should attend? Engineers interested in Linux kernel development on Embedded systems and plateforms.
Read more...

Introduction to Embedded Linux (Hands-on training)

 14 Hours
This is a two day course covering all basic principles of building Embedded linux Systems, around 60% of the entire course time is practical hands-on implementation for real world application using the same standards and tools used in industry
Read more...

Introduction to Embedded Computers

 14 Hours
This course demonstrates through hands-on practice the fundamentals of Embedded Computers.
Read more...

Using C++ in Embedded Systems - Applying C++11/C++14

 21 Hours
This training intends to introduce C++ as the common extension of C when applying object-oriented embedded system development. Since C++ encloses C, this training takes us from C to C++ in a natural way, and looks under the hood of how C++ is implemented. This is especially valuable to comprehend when applying C++ in an embedded resource limited environment.  The C++ standard has recently been undergoing a major revision, a.k.a. as C++11, and a new one is on its way, C++14. This course addresses subjects brought in with these revisions that are especially useful like high performance memory management, concurrency making use of a multicore environment, and bare-metal close to the hardware programming. GOAL/BENEFITS The major objective of this class is that you shall be able to use C++ in a “correct way”.
  • Introduce C++ as an object oriented language alternative in an embedded system context
  • Show the similarities ‑ and differences ‑ with the C language
  • Comprehend different memory management strategies – especially the move semantics introduced with C++11
  • Look under the hood and understand what different paradigms in C++ leads to in machine code
  • Use templates to achieve type safe high order abstractions for bare-metal close to the hardware programming – memory mapped I/O as well as interrupts – especially the variadic templates introduced with C++11
  • Provide some useful design patterns especially applicable in an embedded context
  • A few exercises in order to practice some concepts
AUDIENCE/PARTICIPANTS This training is aimed C++- programmers who intend to start using C++ in an embedded system context. PREVIOUS KNOWLEDGE The course requires basic knowledge in C++ programming, corresponding to our trainings ”C++ – Level 1” and ”C++ Level 2 – Introducing C++11”. PRACTICAL EXERCISES During the training you will practice the presented concepts in a number of exercises. We will use the open and free integrated development environment from Eclipse
Read more...

Embedded Linux: Building a System from the Ground Up

 14 Hours
In this instructor-led, live training in Gliwice participants will learn step-by-step how to build an embedded Linux system from the ground up. From building a minimalistic kernel to configuring the bootup and initialization processes, participants will learn the tools, techniques and mindset needed to deploy a fully functional embedded Linux system. For remote trainings, QEMU will be used to emulate the hardware. Other platforms, including real hardware devices, can be considered on a case by case basis.
Read more...

Efficient microcontroller programming in C

 7 Hours
The course covers the aspects of modern C language dialects (C99, C11, C2x) related to embedded programming and guidelines for efficient and error-immune programming techniques. The examples/exercises are implemented on STM32 family microcontrollers.
Read more...

FPGA Design for Embedded Systems

 7 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers who wish to design high-performance embedded systems using FPGA. By the end of this training, participants will be able to:
  • Install and configure the FPGA software tools needed to design and simulate an embedded system.
  • Select the best FPGA architecture for an application.
  • Develop and enhance various FPGA designs.
Read more...

FreeRTOS: Programming for Real Time Operating Systems

 14 Hours
In this instructor-led, live training in Gliwice, participants will learn how to code using FreeRTOS as they step through the development of a simple RTOS project using a microcontroller. By the end of this training, participants will be able to:
  • Understand the basic concepts of real-time operating systems.
  • Learn the environment of FreeRTOS.
  • Learn how to code with FreeRTOS.
  • Interface a FreeRTOS application to hardware peripherals.
Read more...

Introduction to ARM-M architecture

 7 Hours
The course is an introduction to ARMv6-M, ARMv7-M and ARMv9-M architectures and Cortex-M family of processor cores used in popular microcontrollers.
The course may optionally be accompanied by hands-on exercises using STM32 family microcontrollers.
Read more...

Introduction to IoT Using Arduino

 14 Hours
In this instructor-led, live training in Gliwice, participants will learn the fundamentals of IoT as they step through the creation of an Arduino-based IoT sensor system. By the end of this training, participants will be able to:
  • Understand the principles of IoT, including IoT components and communication techniques.
  • Learn how to use Arduino communication modules that can be used for different IoT systems.
  • Learn how to use and program a mobile app to control Arduino.
  • Use a Wi-Fi module to connect the Arduino to another device.
  • Build and deploy their own IoT Sensor System.
Read more...

Introduction to RISC-V architecture

 7 Hours
The course is an introduction to RISC-V architecture and the microcontrollers based on it. The course may optionally be accompanied by hands-on exercises using GD32VF103 microcontroller and C language or assembly language programming exercises with RARS simulator.
Read more...

Embedded GNU/Linux Kernel Internals and Device Drivers

 35 Hours
Description This 5-day training class uses hands-on exercises combined with instruction to illustrate the concepts of GNU/Linux kernel internals and device driver development. It is desinged to bring you quickly up to speed. We describe processes, concepts and commands necessary to write GNU/Linux device drivers through a combination of theory and on-the-job training. Don't reinvent the wheel, but learn from an experienced trainer and take home a working knowledge and the ability to use it effectively in your own embedded development project. Who should attend? People with interest in or tasked with the development or evaluation of developing GNU/Linux device drivers like software engineers, field engineers, (project) managers, hardware engineers.
Read more...

Learning Vivado

 14 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at FPGA developers who wish to use Vivado to design, debug, and implement hardware solutions. By the end of this training, participants will be able to:
  • Develop HDL systems with C code and Vivado tools.
  • Generate and implement soft processors in Vivado.
  • Test and simulate C code using Vivado.
Read more...

LEDE: Set Up a Linux Wireless Router

 7 Hours
The LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices. In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router. Audience
  • Network administrators and technicians
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Introduction to FreeRTOS

 7 Hours
The course is an introduction to RTOS-based software design for embedded systems/IoT. Attendees are introduced to RTOS concepts, synchronization mechanisms and scenarios of software design using RTOS. The exercises are done with STM32 Nucleo 144 or similar development boards.
Read more...

Model Based Development for Embedded Systems

 21 Hours
Model Based Development (MBD) is a software development methodology that enables faster, more cost-effective development of dynamic systems such as control systems, signal processing and communication systems. It relies on graphic modeling rather than the traditional text based programming. In this instructor-led, live training participants will learn how to apply MBD methodologies to reduce development costs and accelerate the time to market of their embedded software products. By the end of this training, participants will be able to
  • Select and utilize the right tools for implementing MBD.
  • Use MBD to carry out rapid development in the early stages of their embedded software project.
  • Shorten the release of their embedded software into the market.
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Microcontroller Design

 35 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers who wish to learn the design principles of microcontroller design.
Read more...

NetApp ONTAP

 35 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers who wish to implement NetApp ONTAP. By the end of this training, participants will be able to:
  • Set up and administer ONTAP 9.3 Cluster (3 days).
  • Safeguard data through Data Protection technologies (2 days).
Read more...

Object Oriented Programming with C++

 7 Hours
In this course, participants will learn C++ concepts and programming skills.
Read more...

PCB Circuit Design with Eagle

 21 Hours
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout.  EAGLE is a freely available desktop application for designing PCBs. In this instructor-led, live training, participants will learn how to use the Eagle software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Eagle. The training steps through process for designing the circuit board and discusses the process for manufacturing the boards (the course does not include the physical manufacturing of the boards). By the end of this training, participants will be able to:
  • Create a Printed Circuit Board (PCB) from any schematic
  • Create schematics and design circuit boards using Eagle
  • Export the industry-standard files for constructing the circuit board
Audience
  • Engineers
  • Technicians
Format of the Course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Notes
  • To request a customized training for this course, please contact us to arrange.
Read more...

PCB Circuit Design with Altium

 21 Hours
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout.  Altium Designer is a freely available desktop application for designing PCBs. In this instructor-led, live training, participants will learn how to use the Altium software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Altium. The training steps through process for designing and manufacturing the circuit board. By the end of this training, participants will be able to:
  • Create a Printed Circuit Board (PCB) from any schematic
  • Create schematics and design circuit boards using Altium
  • Print and etch a physical circuit board
  • Export the industry-standard files for sending to a large-scale manufacturer
Audience
  • Engineers
  • Technicians
Format of the Course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Notes
  • To request a customized training for this course, please contact us to arrange.
Read more...

Raspberry Pi

 7 Hours
Raspberry Pi is a small, barebones computer developed by The Raspberry Pi Foundation.
Read more...

Raspberry Pi for Beginners

 14 Hours
Raspberry Pi is a very small, single-board computer. In this instructor-led, live training, participants will learn how to set up and program the Raspberry Pi to serve as an interactive and powerful embedded system. By the end of this training, participants will be able to:
  • Set up an IDE (integrated development environment) for maximum development productivity
  • Program Raspberry Pi to control devices such as motion sensor, alarms, web servers and printers.
  • Understand Raspberry Pi's architecture, including inputs and connectors for add-on devices.
  • Understand the various options in programming languages and operating systems
  • Test, debug, and deploy the Raspberry Pi to solve real world problems
Audience
  • Developers
  • Hardware/software technicians
  • Technical persons in all industries
  • Hobbyists
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Note
  • Raspberry Pi supports various operating systems and programming languages. This course will use  Linux-based Raspbian as the operating system and Python as the programming language. To request a specific setup, please contact us to arrange.
  • Participants are responsible for purchasing the Raspberry Pi hardware and components.
Read more...

Real Time Operating System

 7 Hours
A real-time operating system (RTOS) is an operating system (OS) intended to serve real-time application process data as it comes in, typically without buffering delays.
Read more...

Tensorflow Lite for Microcontrollers

 21 Hours
This instructor-led, live training in Gliwice (online or onsite) is aimed at engineers who wish to write, load and run machine learning models on very small embedded devices. By the end of this training, participants will be able to:
  • Install TensorFlow Lite.
  • Load machine learning models onto an embedded device to enable it to detect speech, classify images, etc.
  • Add AI to hardware devices without relying on network connectivity.
Read more...

Serial interfaces in microcontrollers

 7 Hours
The course presents common serial interfaces used in embedded systems and useful practical details of their implementation. The presentation is accompanied by hands-on exercises using STM32 microcontrollers.
Read more...

USB Device programming with STM32CubeIDE

 7 Hours
The course presents the basic aspects of USB device programming and the practical use of STM32CubeIDE for USB device firmware design.
Read more...

Yocto Project

 28 Hours
In this instructor-led, live training in Gliwice, participants will learn how to create a build system for embedded Linux based on Yocto Project. By the end of this training, participants will be able to:
  • Understand the fundamental concepts behind a Yocto Project build system, including recipes, metadata, and layers.
  • Build a Linux image and run it under emulation.
  • Save time and energy building embedded Linux systems.
Read more...

The Yocto Project - An Overview - hands-on

 28 Hours
Description This four day training combines theory with hands-on exercises in order to introduce the Yocto Project.
It answers frequently asked questions like:
  • Is it really necessary to use another version of the toolchain/libraries/packages for each and every GNU/Linux project and an top of that to follow a different work-flow?
  • Can you ensure that the development environment is identical for all developers/suppliers and that you can still produce identical builds like today in 10+ years from now?
  • Can the YP help find out under what software licenses the packages you use are licensed?
Hands-on sessions are performed on target hardware (e.g. Beagle Bone Black Rev. C - http://beagleboard.org/BLACK). After the training you will be able to download a docker image with Ubuntu 14.x and all dependencies pre-installed plus the examples in order to work with the course material in your own labs. Please note that this is not an introductory course to Embedded GNU/Linux. You should already know how Embedded GNU/Linux works and how to configure/build the GNU/Linux kernel and kernel drivers. Who should attend? You already use GNU/Linux for your projects and have probably heard about the Yocto Project, but did not dare to have a closer look into it, or had difficulties using it. You don’t know whether and how your daily work-flow can be accommodated in the YP and generally find the YP rather complicated. Why do we need all this since up to know everything was (supposedly) much easier? After the training you should be able to decide whether you need the YP or not. The workshop is aimed at software-, development-, system engineers, testers, administrators, engineers and other parties interested in the YP, with a solid knowledge of Embedded GNU/Linux.
Read more...

Zig Programming

 14 Hours
This course provides a comprehensive introduction to the Zig programming language, covering its syntax, memory management, application development, and advanced features. Participants will gain hands-on experience with Zig’s unique approach to safety, performance, and interoperability, making it a strong alternative to C and Rust. The course includes practical exercises to reinforce learning and build confidence in writing efficient, reliable Zig programs.
Read more...

Last Updated:

Testimonials (19)

Maybe more exercises could be better for lerning but the time was to little

Gianpiero Arico' - Urmet Spa

Course - Embedded Linux Systems Architecture

He answers my questions very well explained.

Khaled Almarzooqi - Beamtrail

Course - Circuits and Electronics Fundamentals

Additional knowledge about the history of protocols/solutions - how it originated

Michal Baczynski - t-media Polska sp. z o.o.

Course - Introduction to Embedded Computers

Machine Translated

Sean was a dynamic speaker and the hands-on exercises were very interesting and I can see how they will be really applicable.

Temira Koenig - Yeshiva University

Course - Raspberry Pi for Beginners

Presentation of complex issues in a clear and understandable manner

Michal Halenski - TRUMPF Huettinger Sp. z o.o.

Course - ARM Technology

Machine Translated

That the trainer adapts to our needs

Eduardo Fontecha - ORMAZABAL PROTECTION & AUTOMATION S.L.U.

Course - The Yocto Project - An Overview - hands-on

The details on how compiler behaves depending on to the syntax usage. The "Quiz" sections are very stimulating

Andrea Pomatto

Course - Using C++ in Embedded Systems - Applying C++11/C++14

Good examples, focus on most useful material

Piotr Sowinski - Intel Technology Poland

Course - Object Oriented Programming with C++

Basic steps that are very useful when in schematic/ PCB workspace and presented Advanced features, actual demos to follow

hedda david - Allegro Microsystems Philippines, Inc.

Course - PCB Circuit Design with Altium

Information conveyed by the instructor in the context of practical use and tools.

Grzegorz Warchol - Sopem Sp. z o.o.

Course - C++ for Embedded Systems

Machine Translated

Practical work

James - Argent Energy

Course - Introduction to IoT Using Arduino

The aquisition of useful knowlwdge and clarification of some things I was not sure of peviously.

Kenneth Mahoney - University of Glasgow

Course - Arduino: Programming a Microcontroller for Beginners

Large expertise of the instructor.

Krzysztof Rybak - ABB Sp. z o. o.

Course - Embedded Linux: Building a System from the Ground Up

Machine Translated

I genuinely enjoyed the trainer knowledge.

Aaron Swift - ITW Hobart

Course - FreeRTOS: Programming for Real Time Operating Systems

All-encompassing knowledge of a trainer that goes beyond the training program and their industry experience.

Andrzej Bodura - TRW Polska sp. z o.o. Centrum Inzynieryjne

Course - Introduction to Embedded Linux (Hands-on training)

Machine Translated

Issues related to creating and using macros, a visual description of the C language standard, and explaining the usefulness in embedded systems, issues related to compiling and compilers.

Tomasz Torzewicz - TRW Polska sp. z o.o. Centrum Inzynieryjne

Course - Embedded C Application Design Principles for Automotive Professionals

Machine Translated

I really enjoy having a virtual PC online, I can do exercises whenever I want

Dongfu Li - Northforge Innovations Inc

Course - Yocto Project

I liked the hands-on nature of it.

Maurice Egan

Course - Embedded Linux Kernel and Driver Development

Very good substantive preparation.

Magdalena Szumny

Course - Embedded C Application Design Principles

Machine Translated

Provisional Courses

NetApp ONTAP

2025-06-02 09:00
35 hours
Gliwice
6450 PLN (Online)
6950 PLN (Classroom)

Raspberry Pi

2025-06-11 09:00
7 hours
Gliwice
1980 PLN (Online)
2080 PLN (Classroom)

LEDE: Set Up a Linux Wireless Router

2025-06-25 09:00
7 hours
Gliwice
2370 PLN (Online)
2470 PLN (Classroom)

Arduino Programming for Beginners

2025-07-09 09:00
21 hours
Gliwice
3100 PLN (Online)
3400 PLN (Classroom)

Advanced Arduino Programming

2025-07-23 09:00
14 hours
Gliwice
1550 PLN (Online)
1750 PLN (Classroom)

Other regions in Poland

Other Countries

These courses are also available in other countries

Consulting

Embedded Systems Consulting
Online Embedded Systems training in Gliwice, Embedded Systems training courses in Gliwice, Weekend Embedded Systems courses in Gliwice, Evening Embedded Systems training in Gliwice, Embedded Systems instructor-led in Gliwice, Embedded Systems trainer in Gliwice, Embedded Systems instructor in Gliwice, Embedded Systems classes in Gliwice, Embedded Systems private courses in Gliwice, Evening Embedded Systems courses in Gliwice, Embedded Systems instructor-led in Gliwice, Online Embedded Systems training in Gliwice, Embedded Systems one on one training in Gliwice, Embedded Systems on-site in Gliwice, Weekend Embedded Systems training in Gliwice, Embedded Systems boot camp in Gliwice, Embedded Systems coaching in Gliwice